Mymesh COPD17M - Chess

Mymesh COPD17M


Article number:

About the product

IP66 Rated Compact Passive Infra-Red (PIR) Occupancy Detector & Photocell (Input: 100-240 Vac 50/60Hz)

This MYMESH-COPD17M Lighting Control has an IP66 rated weatherproof enclosure and can be surface mounted onto an external wall. Configurable for any room occupancy style, via the Mymesh App.

Easy Installation

MYMESH-COPD17M is compatible with Mymesh commissioning tools.

To be installed by a competent person with reference to BS 7671 or equivalent local standards. If in doubt consult a qualified electrician.

  • Plan where the MYMESH-COPD17M is to be located (see diagram 1). Switch off supply and check for hidden cables and pipes.
  • The detector should be sited so that it is not shaded from daylight.
  • Make sure the power is isolated from the circuit.
  • Remove the front cover by by removing the two screws on the front face of the product.
  • Remove the terminal cover (see diagram 3).
  • The detector should be mounted between 1 and 2.2 metres high, via any of the four pre-drilled mounting holes only and must be mounted with the cable entering from below.
  • Thread mains cable carefully through the required membrane entry point.
  • The MYMESH-COPD17M should be connected as shown in diagram 2:L – Live in. N – Neutral in.
  • IMPORTANT-Replaceterminalcover.
  • Replace the front cover ensuring the two screws are secured.

Technical Summary

Network features

  • Wireless, stand-alone network that is self-organizing and self-healing
  • 2.4GHz communication for reliable data transfer
  • Secure by design
  • Ultra-scalable to > 10.000 fixtures in one network
  • Low operational cost


  • On-the-fly (re) commissioning with a Mymesh BLE Gateway and Mymesh commissioning app for iPad
  • Connect to third-party back-office / Light Management system (LMS) via a Mymesh Ethernet Gateway
Categories: ,


Reviews (0)


There are no reviews yet.

Be the first to review “Mymesh COPD17M”

Your email address will not be published.