Mymesh CESR

About the product

Ceiling Surface Mount Passive Infra-Red (PIR) Occupancy Detector & Photocell (Input: 100-240 Vac 50/60Hz)

This surface mounted MYMESH-CESR can be mounted directly onto solid ceilings or onto a range of different mounting boxes. Configurable for any room occupancy style, via the Mymesh App.

Easy Installation

MYMESH-CESR is compatible with Mymesh commissioning tools.
To be installed by a competent person with reference to BS 7671 or equivalent local standards. If in doubt consult a qualified electrician.
• Plan where the MESH-CESR is to be located (see diagram 1). Switch off supply and check for hidden cables and pipes.
• The MYMESH-CESR should be connected as shown in diagram 2:
L – Live in. N – Neutral in.
• Knockout or drill the appropriate holes on the mounting plate for attaching the plate to the ceiling or back box (if applicable). Feed cables through
the appropriate (side or rear) entry hole. Screw the back mounting plate to the ceiling or backbox via the mounting holes. Wire the cables into the sensor head block terminal. Push the sensor head onto the mounting plate and align the side clips with the slots on the sensor heads.

Technical Summary

Network features

• Wireless, stand-alone network that is self-organizing and self-healing
• 2.4GHz communication for reliable data transfer
• Secure by design
• Ultra-scalable to > 10.000 fixtures in one network
• Low operational cost

Features

On-the-fly (re) commissioning with a Mymesh BLE Gateway and Mymesh commissioning app for iPad
Connect to third-party back-office / Light Management system (LMS) via a Mymesh Ethernet Gateway