Mymesh CEFL - Chess

Mymesh CEFL

Mymesh CEFL

Article number:

About the product

Ceiling Flush Mount Passive Infra-Red (PIR) Occupancy Detector & Photocell (Input: 100-240 Vac 50/60Hz)

This flush mounted MYMESH-CEFL is suitable for easy mounting through a 73/75mm diameter hole into a ceiling void which is at least 78mm deep. Configurable for any room occupancy style, via the Mymesh App.

Easy Installation

MYMESH-CEFL is compatible with Mymesh commissioning tools.
To be installed by a competent person with reference to BS 7671 or equivalent local standards. If in doubt consult a qualified electrician.
• Plan where the MYMESH-CEFL is to be located (see diagram 1). Switch off supply and check for hidden cables and pipes. Make a 73/75mm diameter hole through a standard ceiling board.
• The MYMESH-CEFL should be connected as shown in diagram 2:
L – Live in. N – Neutral in.
• Ensure both springs are fitted to the moulding in the correct orientation (see diagram 3).
• Push the MYMESH-CEFL into the ceiling void, making reference to diagram 4.

Technical Summary

Network features

  • Wireless, stand-alone network that is self-organizing and self-healing
  • 2.4GHz communication for reliable data transfer
  • Secure by design
  • Ultra-scalable to > 10.000 fixtures in one network
  • Low operational cost


  • On-the-fly (re) commissioning with a Mymesh BLE Gateway and Mymesh commissioning app for iPad
  • Connect to third-party back-office / Mymesh Management System (MMS) via a Mymesh Ethernet Gateway
Beoordelingen (0)


Er zijn nog geen beoordelingen.

Wees de eerste om “Mymesh CEFL” te beoordelen

Het e-mailadres wordt niet gepubliceerd.